PSI to Atmospheres Converter | Free Australian Pressure Tool

Convert psi to atm as you type.

Pressure Converter - Convert kPa, PSI, Bar & More Instantly
1 psi ≈ 0.0680459639 atm

Reference for one unit; displayed values may be rounded.

psi

PSI

Use a dot or comma for decimals, without thousands separators.

atm

Atmosphere

Display rounding does not improve the accuracy of your original measurement. Very large or very small results use scientific notation.

Method and source

PSI to Atmosphere Conversion Formula

To convert PSI to atmospheres, multiply the PSI value by 0.068046. One standard atmosphere equals 101,325 Pa — the 101.3 kPa you'll see on Bureau of Meteorology charts — and one PSI equals 6,894.76 Pa, so it takes 14.695943 PSI to make 1 atm.

1 psi ≈ 0.0680459639 atm

PSI and Atmosphere Explained

PSI (psi)

PSI (pound-force per square inch) is an imperial pressure unit: one pound of force bearing on one square inch. It equals 6,894.76 pascals, or 0.068046 of a standard atmosphere. Although Australia officially measures pressure in kilopascals, PSI still appears everywhere in practice — tyre chats, imported compressors, dive gauges and older workshop equipment. Sea-level air reads 14.7 PSI, a typical hatch tyre 32 PSI, and a full scuba cylinder upwards of 3,000 PSI — and readings labelled PSIG measure above the surrounding atmosphere rather than including it.

Where it is used: PSI persists as the everyday pressure unit in Australian workshops, 4WD and boating circles, and dive shops, even though official documentation favours kilopascals.

Origin: The unit emerged from 19th-century British engineering, pairing the imperial pound-force with the square inch, and travelled to Australia through inherited standards and imported equipment.

Atmosphere (atm)

The standard atmosphere (atm) is a fixed reference pressure of exactly 101,325 pascals — the 101.3 kPa quoted in Australian weather reports — chosen to represent average sea-level air. It converts gauge readings into earth-scale statements: a 32 PSI tyre holds about 2.2 atm, an airliner cabin about 0.74 atm at cruise, and a 3,000 PSI scuba fill about 204 atm. Diving medicine, altitude physiology and hyperbaric treatment lean on it because depth and treatment tables are written in whole atmospheres.

Where it is used: Atmospheres anchor scuba training tables, hyperbaric therapy protocols, aviation cabin standards and chemistry reference conditions.

Origin: Nineteenth-century metrologists sought a "normal" air pressure for gas measurements; the value was ultimately fixed at exactly 101,325 Pa by international agreement in the 1950s.

PSI to Atmosphere Conversion Table

Select a value to use it in the calculator.

PSI (psi) Atmosphere (atm)
0.0680459639 atm
0.1360919278 atm
0.3402298195 atm
0.6804596391 atm
0.748505603 atm
0.9866664767 atm
1.0002756695 atm
1.0206894586 atm
1.3609192782 atm
1.7011490977 atm
2.0413789173 atm
2.7218385564 atm
3.4022981955 atm
4.0827578346 atm
5.4436771128 atm
6.804596391 atm
10.2068945865 atm
13.609192782 atm

Atmosphere to PSI Conversion Table

Atmosphere (atm) PSI (psi)
0.1 atm 1.4695948776 psi
0.25 atm 3.6739871939 psi
0.33 atm 4.8496630959 psi
0.5 atm 7.3479743878 psi
0.75 atm 11.0219615816 psi
1 atm 14.6959487755 psi
1.5 atm 22.0439231633 psi
2 atm 29.391897551 psi
2.5 atm 36.7398719388 psi
3 atm 44.0878463265 psi
5 atm 73.4797438776 psi
10 atm 146.9594877551 psi
20 atm 293.9189755103 psi

PSI to Atmosphere in Everyday Objects

Common real-world examples that make PSI and Atmosphere easy to picture at a glance.

  PSI (psi) Atmosphere (atm)
Sea-level air pressure 14.7 psi 1.0002756695 atm
A full scuba cylinder 3000 psi 204.1378917296 atm
An airliner cabin at cruise 11 psi 0.748505603 atm
A hyperbaric session 37 psi 2.5177006647 atm
A mountain bike tyre 30 psi 2.0413789173 atm
A paintball cylinder charge 4500 psi 306.2068375944 atm

When You Need PSI to Atmosphere Conversions

Great Barrier Reef Dive Planning

Divers check a 3,000 PSI fill before the boat leaves Cairns — 204.1 atm absolute — then track depth in whole atmospheres, one added per 10 metres.

Hyperbaric Oxygen Therapy

A chamber gauge shows 36.7 PSI inside the unit; converting gives 2.5 atm, the standard wound-treatment pressure recorded in the session log at hospitals such as Royal Adelaide.

Aircraft Cabin Checks

Maintenance logs a cabin pressure of 10.9 PSI at cruise altitude on the Sydney–Perth route — 0.74 atm, matching the roughly 2,400-metre equivalent cabin standard.

Pressure-Vessel Certification

A hydrostatic test presses a vessel to 100 PSI and the certification sheet, written up against Australian Standards, records 6.8 atm as the figure for the SI archive.

How to Use

  1. 1

    Enter PSI Value

    Type the PSI reading — typical entries include sea-level air (14.7 PSI), a dive cylinder filled to 3,000 PSI, and highway tyre pressures around 32-36 PSI. If your tyre placard shows kPa, 220 kPa is roughly 32 PSI

  2. 2

    View Atmosphere Result

    The atm equivalent appears instantly. For example, 32 PSI — a typical HiLux tyre pressure — converts to about 2.18 atm

  3. 3

    Copy or Swap

    Copy the result or click Swap to convert atmospheres back to PSI

  4. 4

    Check Gauge vs Absolute

    Remember that most gauges read PSIG (above ambient air). Add 14.7 PSI — one more atmosphere — before comparing to absolute-pressure figures

Why Use Be Converter?

Instant Conversion

Get precise PSI to atm results in real time as you type — perfect for reef dive planning and 4WD tyre-pressure checks before a sand run

High Accuracy

Uses the exact international standard: 1 atm = 101,325 Pa and 1 PSI = 6,894.76 Pa, accurate to 6 decimal places — the same figures used in diving medicine

Conversion Table

Quick reference with common values like 14.7 PSI (1.0 atm), 32 PSI highway tyre pressure (2.18 atm), and 3,000 PSI (204.1 atm)

Bidirectional

Easily swap between PSI and atmospheres with one click for reverse conversions

Free & No Signup

No registration required. Unlimited conversions. Completely free, from Broome to Hobart

Privacy First

All calculations happen in your browser. No data is sent to any server

Frequently Asked Questions

How many atmospheres is 1 PSI?
1 PSI equals 0.068046 atm. In reverse, 1 atm = 14.695943 PSI — which is why sea-level air pressure reads about 14.7 PSI on a gauge open to the atmosphere, or 101.3 kPa on the Bureau of Meteorology's synoptic charts.
What is 14.7 PSI in atm?
14.7 PSI × 0.068046 = 1.0003 atm — effectively standard sea-level pressure, the same as the 101.3 kilopascals quoted in Australian weather forecasts. The 0.03 per cent gap exists only because 14.7 is a rounded version of 14.695943 PSI.
What is the difference between PSI and atm?
PSI is an imperial unit still printed on imported gauges and plenty of workshop equipment in Australia, even though the official unit is the kilopascal. The standard atmosphere is a fixed reference equal to average sea-level air pressure (101,325 Pa). PSI measures any pressure on a fine scale; atm tells you how many "layers of sea-level air" a pressure equals, which is why diving and altitude work favour it.
How do I convert scuba tank pressure from PSI to atm?
Multiply PSI by 0.068046. Most Australian dive shops fill cylinders by bar, but imported gauges read PSI — a standard fill around 3,000 PSI holds 204.1 atm. For road examples, a 32 PSI passenger tyre sits at 2.18 atm, while the 18 PSI soft-sand pressures used on K'gari or Stockton Beach work out to about 1.22 atm.
Do I add atmospheric pressure when converting?
If your gauge reads PSIG (most imported ones do), add 14.7 PSI before converting to absolute atmospheres: 30 PSIG + 14.7 = 44.7 PSIA = 3.04 atm. Gauges marked PSIA already include ambient air, so convert directly.
How many atmospheres is 40 PSI?
40 × 0.068046 = 2.72 atm if the reading is absolute — about right for a heavily loaded trailer tyre on the Eyre Highway. If 40 PSI is a gauge value and you need absolute pressure, add one more atmosphere for a total of 3.72 atm.
How deep underwater is 3 atm?
About 20 metres. Pressure rises roughly 1 atm per 10 metres of seawater, so on a typical 20 m reef dive off Cairns you're breathing at about 3 atm absolute — the 44 PSI equivalent reading converts to 2.99 atm.
What is 2000 PSI in atm?
2,000 PSI × 0.068046 = 136.1 atm. That's a typical paintball or high-pressure cylinder charge on an absolute scale, well beyond any breathing-gas scuba rating — the sort of magnitude cylinder test stations around Australia deal with.

About PSI to Atmosphere Converter

Our free online PSI to atmosphere converter puts imported gauge readings into earth-scale terms. Whether you're planning a dive on the Great Barrier Reef with a cylinder filled to 3,000 PSI, dropping your 4WD's tyre pressures for a sand run on K'gari or Stockton Beach, logging a hyperbaric oxygen session, or checking cabin pressurisation on a Perth-to-Sydney flight, this tool delivers the exact equivalent. Officially, Australia works in kilopascals, but PSI persists on imported compressors, dive gauges and workshop gear, while the standard atmosphere — fixed at 101,325 Pa — anchors diving tables, altitude physiology and hyperbaric medicine. Our converter applies the exact factor where 1 PSI equals 0.068046 atm.

Expert Tips for PSI to Atmosphere Conversion

1

Anchor points worth memorising: 14.7 PSI ≈ 1 atm, 32 PSI ≈ 2.18 atm, 18 PSI ≈ 1.22 atm, and 3,000 PSI ≈ 204.1 atm — sea level, highway tyre pressure, soft-sand pressure, and a scuba cylinder

2

In diving, add one atmosphere per 10 metres of seawater: at 20 m on a Queensland reef you breathe about 3 atm absolute regardless of what the cylinder gauge says

3

Hyperbaric oxygen therapy commonly runs 2.0-2.5 atm absolute — 29.4 to 36.7 PSI on the chamber gauge — and treatment units record both figures in session logs

4

Airliner cabins hold near 10.9 PSI absolute at cruise (0.74 atm), equivalent to an altitude of about 2,400 metres — a quick check for pressurisation diagnostics on a long-haul flight

5

Always settle gauge-versus-absolute before converting: PSIG readings omit the 14.7 PSI of ambient air, and dive/medical numbers are almost always absolute

Professional-grade conversion tools for length, weight, area, volume, temperature, pressure, speed, time, and energy measurements