m/s to fps Converter | Convert Metres per Second to Feet per Second

Convert m/s to ft/s as you type.

Speed Converter - Convert km/h, m/s & Knots Instantly

1 m/s ≈ 3.280839895 ft/s

Reference for one unit; displayed values may be rounded.

Enter m/s

m/s

Meters per Second

Use a dot or comma for decimals, without thousands separators.

Result in fps

ft/s

Feet per Second

Decimal places

Display rounding does not improve the accuracy of your original measurement. Very large or very small results use scientific notation.

Method and source

Choose an example to fill the tool. Results use the displayed formula and are rounded for display.

NIST SP 811

ms → fps — Worked examples

Choose an example to fill the tool. Results use the displayed formula and are rounded for display.

m/s to fps Conversion Formula

To convert metres per second to feet per second, multiply the m/s value by 3.28084. This is exact in principle, because one metre is defined as 1/0.3048 ≈ 3.28084 feet.

1 m/s ≈ 3.280839895 ft/s

Meters per Second and Feet per Second Explained

Meters per Second (m/s)

The metre per second (m/s) is the SI derived unit of speed — the distance in metres covered each second. One m/s equals 3.28084 fps and 3.6 km/h. The unit spans the whole measurement world: a 1.4 m/s stroll, 5.83 m/s marathon record pace, 60 m/s compound-bow arrows, 91 m/s paintball markers, 200-380 m/s rimfire and handgun projectiles, and 343 m/s for sound in air at 20°C.

Where it is used: It is the working unit of physics labs, chronographs and reloading manuals, wind tunnel reports at universities like Monash and UNSW, athletics biomechanics, and every SI-based engineering standard.

Origin: It combines the metre — redefined in 1983 using the speed of light — with the atomic second standardized in 1967.

Feet per Second (ft/s)

The foot per second (fps, ft/s) measures how many international feet — exactly 0.3048 metres each — pass per second, with 1 m/s equal to 3.28084 fps. It is the dialect of the overseas shooting range: entry airguns shoot 500-700 fps, full-power rifles 800-1250 fps, centrefire loads 2500-3200 fps, and the sound barrier crosses near 1125 fps. Paintball fields everywhere, Australia included, set chrono limits around 300 fps. One fps is a modest 0.3048 m/s, roughly two-thirds of a typical walking pace.

Where it is used: It is the default unit on overseas ammunition boxes and chronographs, paintball field rules (including Australian fields), archery IBO ratings on bows sold here, and traditional engineering handbooks.

Origin: It depends on the foot, unified in 1959 when English-speaking nations agreed on the exact length of 0.3048 metres.

m/s to fps Conversion Table

Select a value to use it in the calculator.

Meters per Second (m/s)	Feet per Second (ft/s)
	1.6404199475 ft/s
	3.280839895 ft/s
	4.9212598425 ft/s
	6.56167979 ft/s
	9.842519685 ft/s
	16.4041994751 ft/s
	26.2467191601 ft/s
	32.8083989501 ft/s
	49.2125984252 ft/s
	65.6167979003 ft/s
	82.0209973753 ft/s
	98.4251968504 ft/s
	164.0419947507 ft/s
	196.8503937008 ft/s
	328.0839895013 ft/s
	492.125984252 ft/s
	656.1679790026 ft/s
	820.2099737533 ft/s
	1125.3280839895 ft/s

Feet per Second to Meters per Second Conversion Table

Feet per Second (ft/s)	Meters per Second (m/s)
1 ft/s	0.3048 m/s
3 ft/s	0.9144 m/s
10 ft/s	3.048 m/s
16.4 ft/s	4.99872 m/s
32.8 ft/s	9.99744 m/s
50 ft/s	15.24 m/s
65.6 ft/s	19.99488 m/s
100 ft/s	30.48 m/s
328 ft/s	99.9744 m/s
1125 ft/s	342.9 m/s

Meters per Second to Feet per Second in Everyday Objects

Common real-world examples that make Meters per Second and Feet per Second easy to picture at a glance.

	Meters per Second (m/s)	Feet per Second (ft/s)
Brisk walking pace	1.4 m/s	4.593175853 ft/s
Easy jogging pace	3 m/s	9.842519685 ft/s
100 m world record average	10.44 m/s	34.2519685039 ft/s
Compound bow arrow speed	60 m/s	196.8503937008 ft/s
Paintball marker chrono limit	200 m/s	656.1679790026 ft/s
Speed of sound in air	343 m/s	1125.3280839895 ft/s

When You Need Meters per Second to Feet per Second Conversions

Quoting paintball chrono readings on overseas forums

Aussie fields cap markers at 300 fps (91.44 m/s), while overseas players often talk in m/s. Converting between the two keeps the discussion on the same page instantly.

Comparing archery test data

Overseas bow tests report 60-100 m/s while the brand specs quoted at pro shops in Sydney and Melbourne list IBO fps ratings. Converting 70 m/s to 229.66 fps lets archers match spine and point-weight recommendations across both traditions.

Reading wind tunnel and lab reports

Aerospace and university test data — from the wind tunnels at Monash to CSIRO labs — arrive in SI: a 40 m/s tunnel run is 131.23 fps. Converting m/s to fps aligns the numbers with legacy engineering tables built in feet.

Explaining projectile physics in classrooms

Physics problems compute in m/s, but cricket-mad students think in km/h: a 160 km/h delivery is 44.44 m/s or 145.8 fps, while a 343 m/s sound wave is 1125.33 fps — tying equations to what they have watched at the MCG or Optus Stadium.

Related Speed Conversions

Speed Converter: km/h to mph

Kilometers per Hour → Miles per Hour

mph to km/h Converter: Quick Speed Conversion for Aussie Drivers

Miles per Hour → Kilometers per Hour

Convert m/s to km/h — Metres per Second to Kilometres per Hour Speed Converter

Meters per Second → Kilometers per Hour

Kilometres per Hour to Metres per Second Converter — Free Tool for Road, Weather & Sport Speeds

Kilometers per Hour → Meters per Second

Knots to Kilometres per Hour Converter for Australian Boating & Sailing

Knots → Kilometers per Hour

Kilometres per Hour to Knots Converter for Australian Boating & Cyclone Season

Kilometers per Hour → Knots

m/s to mph Converter – Convert Metres per Second to Miles per Hour

Meters per Second → Miles per Hour

Knots to mph Converter for Australian Boating & Cyclone Season

Knots → Miles per Hour

fps to m/s Converter — Convert Feet per Second to Metres per Second Instantly

Feet per Second → Meters per Second

How to Use

1

Enter m/s Value

Type the speed in metres per second — typical entries include bow speeds (50-100 m/s), paintball marker readings (around 91 m/s), or wind tunnel and lab figures
2

View fps Result

The equivalent fps value appears instantly. For example, 91.44 m/s — the 300 fps ceiling at most Aussie paintball fields — converts in a blink
3

Copy or Swap

Copy the result or click Swap to convert fps back to m/s
4

Compare With Familiar Benchmarks

Put the fps figure against marks you know — 1125.33 fps is the sound barrier (343 m/s), while cruising at 110 km/h on the Hume Highway is 30.56 m/s, just over 100 fps

Why Use Be Converter?

Instant Conversion

Get precise m/s to fps results in real time as you type — perfect when an overseas chronograph or spec sheet speaks SI

High Accuracy

Uses the exact factor 1 m/s = 3.28084 fps, derived from the international foot of exactly 0.3048 metres

Conversion Table

Quick reference for arrows and markers: 60 m/s = 196.85 fps (bow arrow), 91.44 m/s = 300 fps (paintball field limit), 343 m/s = 1125.33 fps (speed of sound)

Bidirectional

Easily swap between m/s and fps with one click for reverse conversions

Free & No Signup

No registration required. Unlimited conversions. Completely free, no strings attached

Privacy First

All calculations happen in your browser. No data is sent to any server

Frequently Asked Questions

What is 100 m/s in fps?

100 m/s equals 328.08 fps. In archery terms that is a quick compound bow arrow; in ballistics it is mid-range airgun territory — plenty for target work at the club, and well below centrefire rounds.

How do I convert m/s to fps?

Multiply by 3.28084 — a touch over 3.3. Quick mental method: multiply by 3 and add 10%: 200 m/s → 600 + 60 = 660 fps, against the exact 656.17 fps.

What is 10 m/s in fps?

10 m/s equals 32.81 fps. For scale, an elite sprinter peaks near 12.4 m/s (40.68 fps), and a rapid cricket delivery leaves the hand around 44 m/s (145 fps) — human speed barely crests 150 fps, while bullets pass 3000.

What is 300 m/s in fps?

300 m/s equals 984.25 fps. High-velocity .22 LR boxes often quote figures in this ballpark, placing them just under the 1125.33 fps sound barrier (343 m/s) — a touch slower again on a scorching 40°C afternoon when sound travels faster.

Is this tool free to use?

Absolutely! Our m/s to fps converter is completely free with no sign-up required. Use it as often as you like for archery specs, paintball chrono checks or engineering assignments — no worries.

What is 200 m/s in fps?

200 m/s equals 656.17 fps. That is typical of the PCP air rifle velocities quoted in overseas catalogues. For a local yardstick, Australian paintball fields chronograph markers at about 91 m/s (300 fps), so 200 m/s is more than double the pace.

How fast is a bow arrow in fps?

Compound bows launch arrows at roughly 60-100 m/s, which converts to 196.85-328.08 fps. That is why bow specs at pro shops from Perth to Brisbane quote IBO speeds like 300-350 fps, while test reports often print m/s — the same arrows, different dials.

Which is faster, 1 m/s or 1 fps?

One m/s is faster: it equals 3.28084 fps, while 1 fps is only 0.3048 m/s. A metre is longer than a foot, so any speed looks about 3.3 times bigger when rewritten in fps.

About m/s to fps Converter

Our free online m/s to fps converter restates SI velocities in the unit overseas ranges, forums and spec sheets expect. Whether you are checking a bow's IBO rating against a test report in m/s, verifying the 91.44 m/s (300 fps) limit at your local paintball field, reading an engineering report drafted in feet, or translating a 60 m/s (196.85 fps) arrow speed for an international audience, this tool applies the exact factor 3.28084 from the international foot definition. Metres per second governs Aussie labs, chronographs and classrooms; feet per second still rules overseas shooting and archery circles — this converter joins them instantly.

Expert Tips for m/s to fps Conversion

Multiply by 3.28084 exactly — or use ×3.3 for quick estimates: 343 m/s gives 1127 fps against the exact 1125.33 fps, close enough for sound-barrier checks

Useful anchors: 91.44 m/s = 300 fps (the chrono limit at Aussie paintball fields), 170 m/s = 557.74 fps (typical target airgun velocity), 340 m/s = 1115.49 fps (supersonic territory)

Archery crossover: a 70 m/s bow is 229.66 fps; adding heavier points drops it toward 60 m/s (196.85 fps). Converting both ways shows how fps spine charts line up with the m/s figures in test reports

Beware the abbreviation trap: fps means feet per second here, but camera specs use fps for frames per second. A 10,000 fps camera is filming a 3280.84 fps (1000 m/s) event, not the same quantity

Sanity-check round trips: fps back to m/s is multiplication by 0.3048, so 300 m/s → 984.25 fps → 300 m/s. If the round trip drifts, a digit slipped

Professional-grade conversion tools for length, weight, area, volume, temperature, pressure, speed, time, and energy measurements