Be Converter

Cholesterol mmol/L to mg/dL Converter for Canadian Lab Reports

Convert mmol/L to mg/dL as you type.

Canadian Cholesterol Converter: mmol/L to mg/dL
1 mmol/L = 38.67 mg/dL

Reference for one unit; displayed values may be rounded.

mmol/L

Millimoles per Liter

Use a dot or comma for decimals, without thousands separators.

mg/dL

Milligrams per Deciliter

Display rounding does not improve the accuracy of your original measurement. Very large or very small results use scientific notation.

Method and source

This tool changes units only. It does not interpret test results or provide a diagnosis.

mmol/L to mg/dL Conversion Formula

To convert cholesterol from millimoles per litre to milligrams per decilitre, multiply the mmol/L value by 38.67. The factor comes from the molar mass of cholesterol (about 386.7 grams per mole) and the tenfold difference between a litre and a decilitre.

1 mmol/L = 38.67 mg/dL

Millimoles per Liter and Milligrams per Deciliter Explained

Millimoles per Liter (mmol/L)

Millimoles per litre is the SI unit for reporting cholesterol concentration in blood plasma. Instead of weighing the cholesterol, it counts molecules: one millimole is about 602 sextillion cholesterol particles, and mmol/L states how many of those units are dissolved in each litre of blood. Typical lipid panel values fall between 2 and 8 mmol/L, so the scale is compact and a single decimal place carries real clinical meaning.

Where it is used: Used for lipid panels in Canada, the United Kingdom, Australia, New Zealand, and most of continental Europe.

Origin: Adopted as clinical chemistry laboratories metricized during the 1970s and 1980s, when lab medicine moved to SI units for consistency across the medical sciences.

Milligrams per Deciliter (mg/dL)

Milligrams per decilitre expresses cholesterol as mass: the number of milligrams of cholesterol carried in one tenth of a litre (100 millilitres) of blood. Because cholesterol is weighed rather than counted, the numbers run large — a desirable total cholesterol sits under 200 mg/dL, an optimal LDL under 100 mg/dL, and a very high reading can exceed 300 mg/dL.

Where it is used: The standard unit on lipid panels in the United States and in much of the cardiology research it publishes.

Origin: A survivor of early twentieth-century American clinical chemistry, which standardized results as measured weight per 100 millilitres of serum and never switched to SI units.

mmol/L to mg/dL Cholesterol Conversion Table

Select a value to use it in the calculator.

Millimoles per Liter (mmol/L) Milligrams per Deciliter (mg/dL)
38.67 mg/dL
58.005 mg/dL
77.34 mg/dL
96.675 mg/dL
116.01 mg/dL
135.345 mg/dL
154.68 mg/dL
174.015 mg/dL
193.35 mg/dL
201.084 mg/dL
212.685 mg/dL
232.02 mg/dL
239.754 mg/dL
251.355 mg/dL
270.69 mg/dL
309.36 mg/dL
348.03 mg/dL
386.7 mg/dL

Milligrams per Deciliter to Millimoles per Liter Conversion Table

Milligrams per Deciliter (mg/dL) Millimoles per Liter (mmol/L)
40 mg/dL 1.0343935868 mmol/L
50 mg/dL 1.2929919834 mmol/L
60 mg/dL 1.5515903801 mmol/L
80 mg/dL 2.0687871735 mmol/L
100 mg/dL 2.5859839669 mmol/L
120 mg/dL 3.1031807603 mmol/L
130 mg/dL 3.361779157 mmol/L
150 mg/dL 3.8789759503 mmol/L
160 mg/dL 4.137574347 mmol/L
180 mg/dL 4.6547711404 mmol/L
200 mg/dL 5.1719679338 mmol/L
220 mg/dL 5.6891647272 mmol/L
240 mg/dL 6.2063615206 mmol/L
260 mg/dL 6.7235583139 mmol/L

Millimoles per Liter to Milligrams per Deciliter in Everyday Objects

Common real-world examples that make Millimoles per Liter and Milligrams per Deciliter easy to picture at a glance.

  Millimoles per Liter (mmol/L) Milligrams per Deciliter (mg/dL)
Canadian desirable total ceiling 5.2 mmol/L 201.084 mg/dL
High total cholesterol threshold 6.2 mmol/L 239.754 mg/dL
Optimal LDL target in SI units 3 mmol/L 116.01 mg/dL
Protective HDL floor 1 mmol/L 38.67 mg/dL
Average adult total reading 5 mmol/L 193.35 mg/dL
Very high LDL level 4.9 mmol/L 189.483 mg/dL

Millimoles per Liter Reference Ranges

  Millimoles per Liter (mmol/L) Milligrams per Deciliter (mg/dL)
Desirable total cholesterol 2–5.2 mmol/L 77.34–201.084 mg/dL
High total cholesterol 5.2–6.2 mmol/L 201.084–239.754 mg/dL
Optimal LDL cholesterol 1–3 mmol/L 38.67–116.01 mg/dL
Protective HDL cholesterol 1–2.5 mmol/L 38.67–96.675 mg/dL

Medical disclaimer: the reference ranges on this page are general educational values for healthy adults and may vary by laboratory method, age, sex, and health status. They are not a diagnosis and do not replace professional medical advice. Always ask a qualified healthcare provider to interpret your test results.

When You Need Millimoles per Liter to Milligrams per Deciliter Conversions

Reading a Canadian Lipid Report in US Terms

Your total cholesterol of 5.2 mmol/L — the number printed on reports from hospital and community labs from Halifax to Victoria — equals 201.08 mg/dL. That's right at the line where US lab slips print an under-200 flag, so knowing both units explains why the two countries flag the same blood differently.

Using American Cardiovascular Risk Calculators

US risk tools ask for total and HDL cholesterol in mg/dL. Entering your Canadian report values of 6.2 mmol/L total (239.75 mg/dL) and 1.3 mmol/L HDL (50.27 mg/dL) keeps the ten-year risk estimate honest — whether you're checking ahead of a winter in Arizona or a virtual consult with an American service.

Comparing LDL With US Heart-Health Content

American articles quote an optimal LDL below 100 mg/dL. Your Canadian report shows 3.0 mmol/L, which converts to 116.01 mg/dL — just above that target, and a useful talking point at your next appointment with your family doctor or nurse practitioner.

Tracking Statin Follow-Up Across Borders

If your LDL fell from 3.4 to 2.6 mmol/L after starting treatment, that is a move from 131.48 to 100.54 mg/dL — the same 23.5 per cent improvement expressed both ways, handy whether your follow-up happens in Canada or across the border.

Related Cholesterol Conversions

US to Canadian Cholesterol Converter (mg/dL to mmol/L)
Milligrams per Deciliter → Millimoles per Liter

Closely related tools

US to Canadian Cholesterol Converter (mg/dL to mmol/L)

Convert US cholesterol readings from mg/dL into the mmol/L units used on Canadian lab reports. Built for snowbirds, cross-border commuters, and anyone whose…

Canadian Cholesterol Converter: mmol/L to mg/dL

Convert Canadian lab results (mmol/L) to US mg/dL values for total cholesterol, HDL, LDL, and triglycerides.

How to Use

  1. 1

    Enter Your Value in mmol/L

    Type the number from your provincial lab report — for example, 5.2 for a total cholesterol of 5.2 mmol/L drawn at a community lab or your family doctor's office

  2. 2

    Read the mg/dL Equivalent

    The result appears instantly: 5.2 mmol/L = 201.08 mg/dL, ready to compare with the US reference ranges you see in American articles and risk calculators

  3. 3

    Copy or Swap

    Copy the converted value, or click Swap to turn a mg/dL figure from an American source back into the mmol/L your Canadian report uses

  4. 4

    Verify With the Table

    Cross-check nearby values such as 3.0 mmol/L = 116.01 mg/dL or 6.2 mmol/L = 239.75 mg/dL before your next appointment

Why Use Be Converter?

Instant Lipid Report Translation

Type a value like 5.2 and watch 201.08 mg/dL appear as you type — no submit button between you and the US-scale reading of the report from your lab in Toronto, Vancouver, or Halifax

Guideline-Grade Precision

Uses the exact cholesterol factor of 38.67 mg/dL per mmol/L, so 6.2 mmol/L lands precisely on 239.75 mg/dL — handy when an American heart-health site calls that same number high risk

Reference Table for Common Results

Scan 1.0 to 10.0 mmol/L with mg/dL equivalents, including the familiar Canadian anchors at 5.2 (201.08) and 6.2 (239.75) for total cholesterol

Swap for the Return Trip

One click reverses the conversion when a US heart-health article quotes mg/dL and your family doctor or nurse practitioner reports mmol/L

Free & Unlimited

No registration required. Convert every line of a full lipid panel — total, LDL, HDL, and more — as often as your follow-up appointments demand

Health Data Stays on Your Device

All calculations run locally in your browser, right on your phone or laptop. Your cholesterol numbers are never uploaded, logged, or shared — not even with us

Frequently Asked Questions

How many mg/dL is 1 mmol/L of cholesterol?
One mmol/L equals 38.67 mg/dL, and the same factor applies to every cholesterol fraction — total, LDL, and HDL alike. It reflects the molar mass of cholesterol (about 386.7 grams per mole) divided by the tenfold difference between a litre and a decilitre.
How do I convert my cholesterol from mmol/L to mg/dL?
Multiply the mmol/L value by 38.67. For example, a total cholesterol of 6.2 mmol/L is 6.2 × 38.67 = 239.75 mg/dL. For a quick estimate, multiply by 40 and subtract about 3.5 per cent.
What is 5.2 mmol/L in mg/dL?
5.2 mmol/L equals 201.08 mg/dL. This is a pivotal number for Canadians: labs from St. John's to Victoria treat 5.2 mmol/L as the top of the desirable range, while US labs flag 200 mg/dL — essentially the same threshold written in different units.
Why does Canada use mmol/L but the US use mg/dL for cholesterol?
Canadian laboratory medicine adopted SI units in the 1970s and 1980s, so whether your blood was drawn in Montreal, Calgary, or Whitehorse, cholesterol is reported as a particle concentration in mmol/L. The US kept the older mass-per-volume convention of mg/dL. One blood sample therefore produces two very different-looking numbers — 5.2 and 201 describe the same cholesterol level.
Is the 38.67 factor the same for HDL and LDL cholesterol?
Yes. Total cholesterol, LDL, and HDL are all the same molecule, so a single factor of 38.67 converts any of them. Triglycerides are the exception: they have a different molar mass and use a factor of about 88.57, so never apply 38.67 to triglyceride values.
Is 5.2 mmol/L cholesterol high?
5.2 mmol/L (201.08 mg/dL) sits exactly at the upper edge of the desirable range. Total cholesterol is generally considered desirable below 5.2 mmol/L and high above 6.2 mmol/L (239.75 mg/dL), so at exactly 5.2 your family doctor will focus on your LDL, HDL, and overall cardiovascular risk rather than the total alone.
Why is LDL in mmol in Canada?
Canadian labs standardized on SI units decades ago, so every cholesterol fraction, LDL included, is reported in mmol/L — at hospital labs and private community labs alike. To compare with the US optimal LDL target of under 100 mg/dL, divide by 38.67: 100 mg/dL is about 2.59 mmol/L, so a Canadian LDL below 2.6 mmol/L matches the American cut-off.
What is 3.0 mmol/L LDL in mg/dL?
An LDL of 3.0 mmol/L equals 116.01 mg/dL. On the US scale that falls in the near-optimal band — above the optimal mark of 100 mg/dL (2.586 mmol/L) but below the borderline-high level of 160 mg/dL (4.138 mmol/L). Useful to know if you're reading American heart-health content or using a US risk calculator.

About Our mmol/L to mg/dL Cholesterol Converter for Canadians

Our free online mmol/L to mg/dL cholesterol converter turns the SI-unit lipid results on your Canadian lab report into the mass-based figures used in American medicine. Whether you're in Ontario reviewing results from a community lab, in BC checking your provincially covered panel, or a snowbird heading south who needs values an American clinic will recognize, this tool delivers instant, precise conversions. Total cholesterol, LDL, and HDL all share the same factor of 38.67 mg/dL per mmol/L, so one converter covers your entire lipid panel before your next visit with your family doctor or nurse practitioner.

Expert Tips for mmol/L to mg/dL Conversion

1

The exact factor 38.67 comes from the molar mass of cholesterol, roughly 386.7 grams per mole: one millimole dissolved in a decilitre of blood weighs 38.67 mg, so mg/dL = mmol/L × 38.67.

2

Memorize four anchors and you can sanity-check any report: 5.2 mmol/L ≈ 201 mg/dL (top of desirable), 6.2 mmol/L ≈ 240 mg/dL (high), 2.6 mmol/L ≈ 100 mg/dL (optimal LDL), and 1.0 mmol/L ≈ 39 mg/dL (protective HDL floor).

3

Scale around the boundary anchor: 5.172 mmol/L is exactly 200 mg/dL, so 2.586 mmol/L is 100 mg/dL and 10.34 mmol/L is 400 mg/dL without any further math.

4

Never convert triglycerides with 38.57 or 38.67-style cholesterol factors — triglycerides use about 88.57 mg/dL per mmol/L. Only total cholesterol, LDL, and HDL share the 38.67 factor.

5

When tracking treatment over time, keep two decimals: an LDL fall from 3.4 to 2.6 mmol/L is 131.48 down to 100.54 mg/dL — a 23.5 per cent reduction you can discuss precisely at your statin follow-up with your family doctor.

Professional-grade conversion tools for length, weight, area, volume, temperature, pressure, speed, time, and energy measurements