Long Tons to Kilograms Converter — Convert Imperial Tons to kg

Convert ton to kg as you type.

Weight Converter Australia - Fast & Accurate Conversions

1 ton = 1016.05 kg

Reference for one unit; displayed values may be rounded.

Enter Imperial Tons

ton

Imperial Tons

Use a dot or comma for decimals, without thousands separators.

Result in Kilograms

Kilograms

Decimal places

Display rounding does not improve the accuracy of your original measurement. Very large or very small results use scientific notation.

Method and source

ton to kg Conversion Formula

To convert imperial tons to kilograms, multiply the ton value by 1016.05. One long ton equals 2240 pounds, and 2240 lb converts to 1016.05 kg.

1 ton = 1016.05 kg

Imperial Tons and Kilograms Explained

Imperial Tons (ton)

An imperial ton, or long ton (ton), is a British unit of weight equal to 2240 pounds — exactly 1016.05 kg in metric terms. It is built as 20 hundredweight of 112 lb each and sits about 1.6% heavier than a metric tonne and 12% heavier than the US short ton. The long ton weighs industrial-scale cargoes: coal shipments, scrap loads, ship displacement, and railway locomotives are its native territory.

Where it is used: Australia fully metricated decades ago, so the long ton now lives mainly in old mining ledgers from Broken Hill and Kalgoorlie, wool export records, shipping displacement figures, and heritage engineering documents.

Origin: Formalized from medieval English units as 20 hundredweight, the long ton was the official imperial ton until metrication; Britain moved to the tonne in trade, Australia ran its own metric conversion through the 1970s, and the 2240 lb ton persists in legacy and niche use.

Kilograms (kg)

A kilogram (kg) is the base unit of mass in the International System of Units, equal to 1000 grams. It anchors the metric scale from groceries to freight: a 32 kg suitcase, a 500 kg pallet, a 1016.05 kg long-ton load. Because every metric unit is a power-of-ten multiple of the kilogram, weighbridge tickets, customs entries, and engineering calculations worldwide are quoted in kilograms — including conversions of imperial tonnages.

Where it is used: Kilograms are the mandatory trade unit in Australia since metrication and the universal unit for shipping documents, industrial specs, and science.

Origin: The kilogram originated in 1790s France as the mass of a litre of water and, since 2019, is defined through the Planck constant rather than a physical prototype.

Imperial Tons to Kilograms Conversion Table

Select a value to use it in the calculator.

Imperial Tons (ton)	Kilograms (kg)
	10.1605 kg
	50.8025 kg
	101.605 kg
	254.0125 kg
	508.025 kg
	762.0375 kg
	1016.05 kg
	1524.075 kg
	2032.1 kg
	3048.15 kg
	5080.25 kg
	7620.375 kg
	10160.5 kg
	15240.75 kg
	20321 kg
	25401.25 kg

Kilograms to Imperial Tons Conversion Table

Kilograms (kg)	Imperial Tons (ton)
10 kg	0.0098420353 ton
50 kg	0.0492101767 ton
100 kg	0.0984203533 ton
250 kg	0.2460508833 ton
500 kg	0.4921017666 ton
1000 kg	0.9842035333 ton
2000 kg	1.9684070666 ton
5000 kg	4.9210176665 ton
10000 kg	9.8420353329 ton
20000 kg	19.6840706658 ton
50000 kg	49.2101766645 ton

Imperial Tons to Kilograms in Everyday Objects

Common real-world examples that make Imperial Tons and Kilograms easy to picture at a glance.

	Imperial Tons (ton)	Kilograms (kg)
A grand piano	0.5 ton	508.025 kg
A small hatchback car	1 ton	1016.05 kg
An African elephant bull	5 ton	5080.25 kg
A loaded shipping container	22 ton	22353.1 kg
A city bus	12 ton	12192.6 kg

When You Need Imperial Tons to Kilograms Conversions

Scrap-Metal Settlements

Old contracts from yards in Newcastle or Geelong quote per long ton while exporters to Asia settle per kilogram. A 22 ton ferrous load converts to 22353.1 kg — the figure that reconciles the per-kg invoice with the per-ton quote.

Heritage Railway Engineering

Locomotive specs are archived in long tons. A 100 ton engine is 101605 kg, the number a modern metric crane-hire assessment needs before a lifting operation on a heritage line like Puffing Billy's Belgrave route.

Quarry and Aggregate Orders

Historic quarry price lists quote gravel and sand per ton. Converting a 15 ton delivery to 15240.75 kg checks it against a 15 tonne (15000 kg) axle-weight permit for the route.

Digitising Historical Shipping Records

Archived fleet lists in Sydney and Fremantle record displacement in long tons. Applying 1016.05 rather than 1000 keeps a converted 2500 ton vessel at 2540125 kg — preserving totals that metric databases aggregate.

Related Weight Conversions

Kilograms to Pounds Converter – Fast & Accurate

Kilograms → Pounds

Convert lb to kg Instantly – Free Australian Weight Converter

Pounds → Kilograms

Grams to Ounces Calculator AU

Grams → Ounces

Ounces to Grams Converter — oz to g for Aussie Kitchens

Ounces → Grams

Convert Kilograms to Grams — Free kg to g Converter

Kilograms → Grams

Grams to Kilograms Converter — Free g to kg Tool for Australia

Grams → Kilograms

mg to g Converter — Convert Milligrams to Grams Instantly

Milligrams → Grams

Tonnes to Kilograms Converter (t to kg)

Metric Tons → Kilograms

Convert Stones to Kilograms — Free st to kg Converter

Stones → Kilograms

Pounds to Ounces Converter for Baby Weights, Recipes & Cricket Bats

Pounds → Ounces

Ounces to Pounds Converter for Australian Recipes & Imports

Ounces → Pounds

How to Use

1

Enter Your Weight in Imperial Tons

Type the long ton value — for example, enter 3 for a 3 ton wool clip listed on a historical export manifest
2

See the Kilogram Equivalent

The result appears instantly: 3 ton = 3048.15 kg, the unit today's weighbridges at Australian quarries and depots read
3

Copy or Reverse

Copy the result or click Swap to convert kilograms back to imperial tons
4

Check the Table

Browse the conversion table for common values like 0.5 ton = 508.025 kg or 10 ton = 10160.5 kg

Why Use Be Converter?

Instant Conversion

Get accurate long ton to kilogram results in real-time as you type — enter 5 for a scrap load and see 5080.25 kg before the ute rolls onto the weighbridge

Exact Long-Ton Standard

Uses the imperial long ton of 2240 lb = 1016.05 kg, not the US short ton (907.18 kg) or metric tonne (1000 kg) — the distinction that can sink a freight quote from Brisbane to Perth

Industrial Reference Table

Common trade weights at a glance — from 0.01 ton to 25 ton — covering skip bins, road train loads, and heritage locomotives

Swap with One Click

Toggle between long tons and kilograms instantly — ideal when an old mining contract says tons but today's weighbridge ticket prints kg

Free & Unlimited

No registration required. Convert as many weights as you need, from a single skip bin to hundred-ton shipments — always free

Completely Private

All calculations run locally in your browser. Your trade and shipment data never leaves your device

Frequently Asked Questions

How many kilograms are in 1 imperial ton?

1 imperial (long) ton equals 1016.05 kg. It is defined as 2240 pounds, and converting those pounds at 0.453592 kg each gives 1016.05 kg.

Is an imperial ton the same as a US ton or a metric tonne?

No. The imperial long ton is 2240 lb (1016.05 kg), the US short ton is 2000 lb (907.18 kg), and the metric tonne is 1000 kg. The long ton is the heaviest of the three — about 1.6% more than a tonne and 12% more than a short ton.

How many kg is 5 long tons?

5 imperial tons equals 5080.25 kg (5 × 1016.05). That's a solidly loaded truck tray on an Australian highway — well over the 5000 kg mark a metric-only reading would suggest.

Why is a long ton 2240 pounds?

The long ton is 20 hundredweight, and a British hundredweight is 112 lb (8 stone of 14 lb). Twenty times 112 makes 2240 lb — a structure dating back to medieval English trade units that Australia inherited before metrication.

Is a long ton heavier than a metric tonne?

Yes, slightly. One long ton is 1016.05 kg against the tonne's 1000 kg — a 16.05 kg difference, or 1.6%. Over a 100 ton contract that gap becomes 1605 kg, enough to matter when a buyer settles by the kilo.

How many kg is 10 imperial tons?

10 long tons equals 10160.5 kg (10 × 1016.05). Heritage railways like Puffing Billy quote locomotive weights this way — a 10 ton engine registers 10160.5 kg on a modern metric weighbridge.

What is half a long ton in kilograms?

Half an imperial ton is 508.025 kg (0.5 × 1016.05). It clears the 500 kg mark that a half-tonne would imply — relevant when a skip bin or pallet is rated to exactly 500 kg.

How many long tons is 1000 kg?

1000 kg equals 0.9842 long tons (1000 ÷ 1016.05). In other words, a metric tonne falls about 1.58% short of an imperial ton.

About Imperial Tons to Kilograms Converter

Australia went metric in the 1970s, but plenty of our history was weighed in imperial long tons. Our free online converter turns them into kilograms instantly and accurately. Whether you are digitising a Broken Hill mining ledger, reading a heritage railway specification, pricing an old wool clip, or reconciling historical shipping figures from the pre-metric era, this tool delivers reliable results. The long ton equals 2240 pounds or 1016.05 kg — heavier than both the US short ton (907.18 kg) and the metric tonne (1000 kg) — and it still appears in old Australian trade documents, ship displacement figures, and mining statistics.

Expert Tips for ton to kg Conversion

Always confirm which ton a contract means. Long ton = 1016.05 kg, short ton = 907.18 kg, tonne = 1000 kg. The 108.87 kg gap between long and short is the most expensive confusion in freight.

Historic Australian mining and scrap contracts are often quoted per long ton while today's buyers pay per kilogram. Converting a 22 ton load to 22353.1 kg lets both prices be compared on one line.

Ship displacement in older documents uses long tons. A 1000 ton tramp steamer displaces 1016050 kg — divide by 1016.05, never 1000, when digitising fleet records held in Sydney or Fremantle archives.

Historic quarry and aggregate price lists in Australia may still price per ton. A 15 ton gravel delivery is 15240.75 kg, which decides axle-load compliance on the haul route.

For quick estimates, add 1.6% to a metric reading: 50 t becomes about 50.8 long tons. Use the exact 1016.05 factor for invoices and customs entries.

Professional-grade conversion tools for length, weight, area, volume, temperature, pressure, speed, time, and energy measurements